GE MobileView 4 Installation Manual Download

Page: 54 / 106

MobileView 4

Installation Manual

Camera control

Use the camera control settings to adjust the appearance of images such as brightness and
contrast. Most of these settings make changes at the hardware level and relate to the
hardware of the image capturing device.

Press the

Camera Control

button to display the

Camera control

screen (

Figure 36

Figure 36. Camera control screen

The camera control screen contains the following fields:

Brightness.

Lightens or darkens the image. Move the slider bar to the left to reduce the

lightness or right to increase the lightness of the image.

Contrast.

Adjusts the distribution of light and dark regions across the image. Move the

slider bar to the left to reduce the contrast or right to increase the contrast.

Summary of Contents for MobileView 4











































































































Search results

Summary of Contents for MobileView 4

Reviews:

Related manuals for MobileView 4

Brands by name

Popular brands

GE MobileView 4, Installation Manual

Search results

Summary of Contents for MobileView 4

Reviews:

Related manuals for MobileView 4

Brands by name

Popular brands