GE MobileView 4, Installation Manual

Page: 45 / 106

Chapter 4
DVR configuration
35
System configuration
Each MobileView DVR must be configured based on system installation and use
requirements. Consequently, configurations vary from install to install and site to site. If you
are commissioning a new system, carefully consider how a particular property would use
MobileView and adjust operating parameters accordingly.
Using Video Manager, connect to the target DVR and press the Config button ( Figure 30 ).
This will provide access to the configuration and operational settings of the DVR.
Figure 30. Config button
The buttons under the heading Remote MobileView settings in the configuration screen
( Figure 31 ) control the DVR’s operational characteristics.
Figure 31. Remote settings