3
LIST OF FIGURES
1. Primary disconnects removed from the lower studs, showing the original current
sensors (LA-1600 shown)......................................................................................................................... 5
2. Original flux shifter and trip unit (Type LTS1 shown) mounting locations (LA-1600
shown). ..................................................................................................................................................... 5
3. Components supplied with the conversion kit. ...................................................................................... 6
4. Flux shifter assembly. .............................................................................................................................. 7
5. Flux shifter mounting area (LA-800 shown)............................................................................................ 7
6. Flux shifter assembly installed, as viewed from the bottom of the breaker. ........................................ 8
7. Flux shifter assembly installed, as viewed from the right front of the breaker (LA-800
shown). ..................................................................................................................................................... 8
8. Parts sequence for connecting the microswitch link .............................................................................. 9
9. 36-pin trip unit connector....................................................................................................................... 10
10. 36-pin connector adapter bracket. ......................................................................................................... 10
11. Adapter bracket locking tabs. ................................................................................................................ 10
12. Installing the push nuts onto the guide pins. ....................................................................................... 11
13. Locking tabs on mounting plate. ........................................................................................................... 11
14. Trip unit mounting plate attached to the support bracket. .................................................................. 12
15. Mounting plate and support bracket mounted on the breaker (shown with trip unit
installed).. ............................................................................................................................................... 12
16. Installing the current sensors (LA-800).................................................................................................. 13
17. Installing the current sensors (LA-1600)................................................................................................ 13
18. Caution label to be applied to the breaker and compartment door..................................................... 14
19. Trip unit installed on the breaker. ......................................................................................................... 14
20. Neutral sensor outline for LA-800 breakers........................................................................................... 15
21. Neutral sensor outline for LA-1600 breakers......................................................................................... 16
22. Cabling diagram for MicroVersaTrip Plus™ and MicroVersaTrip PM™ trip units with
ground fault on four-wire loads ............................................................................................................ 19
