56
SD Series Technical Manual
MDS 05-4846A01, Rev. F
Invisible place holder
Figure 27. Virtual Radio Channel (VRC) Concept
IP Payload
Configuration for
VRC—Screen
Selections
After making configuration changes, click
Commit Configuration
to apply
the new setting(s).
Enabling/Disabling the IP Payload Port
To enable or disable an IP payload port, click the drop-down box to the
right of
Status
, and set it to
Enabled
or
Disabled
as desired.
Setting the Mode
Set the mode by clicking the drop-down window to the right of
Mode
,
and choosing one of the following:
UDP Socket
,
TCP Client Socket
,
TCP
Server Socket
, or
TCP Server/Client Socket.
The selection must match the
service in which it will operate.
Talk on/Listen to Settings Channel—VRC)
Any combination of the three Virtual Radio Channels may be entered in
the
Talk on
field. Click the drop-down window to the right of
Talk on
and
set to the desired VRC (1, 2, or 3).
To set the Listen to channel, click the drop-down window to the right of
Listen to
and make the desired selection (
VRC-1
,
VRC-2
,
VRC-3
,
ALL
, or
NONE
).
RADIO 1
RADIO 2
IP Payload 1 Data
Ethernet/IP RTU
IP Payload 1 Data
(Talk on VRC-1)
Serial COM2 Data
(Talk on VRC-2)
(Listen on VRC-1)
Serial-Based RTU
Serial COM2 Data
(Listen on VRC-2)
