4
LCT 450 Installation/Operation Guide
05-4819A01, Rev. 08
Installation Steps
Below are the basic steps for installing the transceiver. Refer to
Figure 4
as necessary when making cable connections.
1.
Mount the transceiver to a stable surface
using the U-shaped
bracket provided. Begin by attaching the radio’s mounting bracket
to the bottom of the transceiver case (if not already attached) using
the four 6-32 x 1/4 inch (6 mm) screws supplied.
Figure 5
shows
the transceiver mounting dimensions with bracket attached.
NOTE:
To prevent moisture from entering the radio, do not mount the
case with the cable connectors pointing up. Also, dress all
cables to prevent moisture from running along the cables and
into the radio.
Invisible
place
holder
Figure 5. Transceiver Mounting Bracket Dimensions
6.86"
3.25"
83 mm
2.0"
51 mm
5.63"
143 mm
174.24 mm
177.80 mm
7.00"
U-Shaped Bracket
(Part No. 821753A14)
