05-2806A01, Rev. L
MDS iNET Series Reference Manual
87
2.9.2 Configuration Scripts Menu
A configuration script file contains all of the settable parameters of a radio that are accessible through the
menu interface, with a few exceptions. A configuration script file is in plain text format and can be easily
edited in a text program.
Configuration scripts can be helpful in several ways. Three common uses for them are:
• To save and restore known-good configuration files from your radios.
• To facilitate the configuration of a large number of radios.
• To provide troubleshooting information when you contact the factory for technical support.
How Configuration Files Work
When a configuration script file is downloaded to a radio (
Retrieve
), the radio executes the parameters as
commands and takes the values contained in it. When a configuration script file is uploaded from the radio
(
Send
) it contains the current values of the parameters that the radio is configured with. Figure 2-78 on
Page 87 shows the Configuration Scripts Menu.
Figure 2-78. Configuration Scripts Menu
Timeout
TFTP transfer time expired. Increase the
timeout value.
Flash Error
Flash memory error. Contact factory for
assistance.
Bad CRC
Cyclic Redundancy Check reporting a
corrupted file. Attempt to re-load, or use a
different file.
Version String Mismatch
Invalid file detected. Attempt to re-load, or use
a different file.
Sending LCP Requests
The PPP server is querying for any clients that
may need to connect.
Port not Enabled
The serial port is disabled.
Table 2-8. Common Errors During TFTP Transfer
Error Message
Likely Cause/Corrective Action
Summary of Contents for MDS iNET Series
Page 12: ...x MDS iNET Series Reference Manual 05 2806A01 Rev L...
Page 159: ...05 2806A01 Rev L MDS iNET Series Reference Manual 147 Figure A 22 EDS Wizard Completion Screen...
Page 165: ...05 2806A01 Rev L MDS iNET Series Reference Manual 153 NOTES...
Page 166: ...154 MDS iNET Series Reference Manual 05 2806A01 Rev L NOTES...