GE Masoneilan VECTOR V1100, Instruction Manual

Page: 45 / 60

45
Figure 7 shows a configuration for direct power.
Figure 7 Direct External Powered Configuration
VECTOR V1100 with HART Field Devices in Multi-Drop Mode
The VECTOR V1100 can support up to a maximum of three (3) wired HART enabled field
devices. These can be any combination of either input or output wired HART enabled field
devices.
The maximum number of wired-HART field devices that any loop can support is installation
dependent. The actual number of allowed field devices on any loop is restricted by the
insertion voltage drop of all field devices, wire losses and minimum Loop Power Source
voltage.
Two modes
selectable
continuous power or
programmable duty