GE MAC 800, Service Manual

Page: 11 / 122

Introduction
2031504-159D MAC™ 800 1-5
Equipment Identification
Equipment can be identified via the product label and serial number
attached to the equipment. The following topics describe the components
of the product label and the serial number.
Product Label Format
GE product labels provide the product’s part number, model description,
serial number, manufacture date, and manufacture site. The following
illustration shows the layout of a typical product label. A description of
the label components follows the illustration.
NOTE
Actual product label may differ from this representative example.
Serial Number Format
Every GE device is uniquely identified via serial number, which appears
on the product label (see
“Product Label Format” on page 1-5). The
following illustration and table describe the serial number components.
Product Label
Item Description
A Date of manufacture in YYYY-MM format
B Part number of product
C Product code description
D Serial number.
For more information, see
“Serial Number Format” on page 1-5.
E Manufacture site