GE MAC 5000, Operator'S Manual

Page: 134 / 228

MAC 5000 System — 2000657-024, Revision A
Defining the System Setup: Define the Basic System Setup
12-10
Information
line Select Yes to enable the help information
line on the screen.
Cart number Type a number that identifies this system.
Site number Type a number from 1-32 to identify where
the data will be stored in the MUSE CV
system.
Location
number Type a number to identify the location of
this system to a MUSE CV system. Use a
value from 1-99 for MUSE CV systems
using software version 002B-004 or 3A/
CLM-1B. Use a value from 0-599 for a
MUSE CV system using software version
4A or later.
File Manager
sort Select the sorting method your system
uses to display stored ECGs.
Delete after
transmit Select Yes to delete an ECG after
transmitting it to a receiving device.
Figure 12-1. Miscellaneous Setup (Continued)
Item Description
Text on bottom Select Yes to print the ECG test
information on the bottom of the ECG
reports.
Print barcodes Select Yes if you want the patient
information printed in a barcode format.
Automatic
Shutdown Type a number (
x) greater than zero to
enable the battery conservation mode. If a
key is not pressed within (
x) minutes, your
system will automatically power off. Only
patient data is saved when the system
powers off.
Serial power
always on Select
Yes to enable continuous power to
the serial ports.
System
password Type a 6-character password that allows
you to access the
System Setup and
Delete functions. The System password
that is set at the factory is “system.”
Figure 12-1. Miscellaneous Setup (Continued)
Item Description