GE MAC 1200, Operator'S Manual

Page: 148 / 200

10-24 MAC 1200/1200 ST Revision C
2012250-021
System Setup: System Setup
Default mode
This is the operating mode the unit defaults to after power-up:
[Automatic].
Language
To select the language.
Enable Password Protection
Select Yes to protect the setup menu with a password. You will be asked
to enter a password and to repeat it. Then password protection is active.
To change the password (only possible when password protection is
active), do the following.
1. Select menu item Enable password.
2. Enter the old password.
3. Enter the new password.
4. Repeat the new password.
Test Data
Used for demonstration purposes (yes). It should be set to [no] (default)
for proper clinical use.
Restore Defaults
Selecting Yes will restore the factory default settings (including the
defaults of the three operating modes).
The electrocardiograph must be switched off and on again for the new
settings to become effective.
Print Configuration Lists
Selecting Yes will display a menu with all available configuration lists.
„ All lists
„
System Setup/Communication/Peripheral Devices/Patient Data