GE Mabe GLD9312, Technical Service Manual, Page: 12 / 21

12
Component Removal
Removing Upper Rack
1. Pull tab out and remove the end cap
2. Pull the rack straight out and off the rails.
3. Replace the end caps.
4. Push the rails all the way back into the
dishwasher and pull upper rack all the way
out
Middle Spray Arm
Check holes in spray arm on for bits of foreign
matter.
Check spray arms for rotation
REMOVAL AND REPLACEMENT
1. Pull upper rack all the way out
2. Unscrew the plastic collar holding the spray
arm to the upper rack
.
.
Lower Spray Arm, Fine Filter, and Inlet Cover
Check the holes in the arm for bits of foreign
matter. Also check the spray wash arm for
rotation. Clean the fine filter screen if soil is
present.
The lower spray wash arm can be removed by
gently lifting and rotating it counter clockwise.
Wash Pump Disassembly
1.
Remove the lower spray arm
2. Remove the 3 screws holding the hub.
3. Detach the water conduit from the tub
assembly.
4. Lift the water conduit and hub straight up to
remove from the pump.
Tab
Collar
3 screws
Water
Conduit
Holding Clips