GE LOGIQ Totus, Basic Service Manual

Page: 417 / 644

GE HealthCare CONFIDENTIAL
D
IRECTION
5936427 , R
EV
. 1 LOGIQ T
OTUS
Basic Service Manual
Section 8-7 - Replacing OPIO 8 - 91
8-7-4 Replacement of the Gel Holder R3
This table includes information specific to these instructions. For more information
8-2-6 "Tools needed
for servicing the LOGIQ Totus" on page 8-5
/
8-2-7 "PPE Required During Service" on page 8-6
8-7-4-1 Removal Procedure
8-7-4-2 Installation Procedure
1.) Parts to be installed in reverse order of removal
2.) Perform “Functional Checks after FRU replacement (Debrief Guideline)” as described in
Section 8-
12 on page 8-223
Table 8-40 Manpower, Time, Tools, and PPE
Manpower Time Tools PPE
One person Approximately 5 minutes Philips Screwdriver
Cut resistant gloves
Knee Pad
Step Corresponding graphic
1.
Unscrew 3 screws to remove the Gel Holder R3 from the T2 Side
Prober Holder Left