GE LOGIQ Totus, Basic Service Manual

Page: 332 / 644

GE HealthCare CONFIDENTIAL
D
IRECTION
5936427 , R
EV
. 1 LOGIQ T
OTUS
Basic Service Manual
8 - 6 Section 8-2 - Warnings and important information
8-2-7 PPE Required During Service
The following PPE are required during service tasks, per EHS Policy:
Adjustable Torque Driver 2.5-11.5 in-lbs 46-282782P1 or available equivalent
11-29 in-lbs. 2102278-043 or available equivalent
Spanner Open End Wrench 1 1/8 inch thin profile 2356552 or available equivalent
Allen Hex Head Long Shaft
Ball End Driver Set
American 46-194427P353 or available equivalent
Needle Nose Pliers and
Cutters Set
Part of small maintenance tool set 5112579-2 or available equivalent
Channel Lock Pliers 10 inch 5109897 or available equivalent
Combination Open And Box
End Ratchet Wrench
1/2 inch 2246823 or available equivalent
* 90 degree “L“ is suggested. A full set of 90 degree “L“ TORX wrenches are recommended.
** Heavy mechanical parts may need a specific torque. Each procedure will indicate the torque needed.
^ Torque wrenches, digital multimeters and safety analyzers are tools that required periodic calibration. Check with your local
Service Organization to ensure the tools periodic calibration is performed.
PPE Required During Service
• Safety Glasses
• Safety Shoes
• Cut Resistant Gloves
• Knee Pad (if kneeling is required)
• ESD - mat and wrist strap
Table 8-2 Tools Used for Servicing LOGIQ Totus (Continued)
Tool Type Tool Size GE HealthCare Part Number