GE LOGIQ 7, Basic User Manual

Page: 745 / 984

Image/Data Management
LOGIQ 7 Basic User Manual 15
-
5
Direction 2392206-100 Rev. 1
Image/Data Management
Reviewing Patient Images
Please refer to Chapter 4 for more information on the following:
• Retrieving and editing archived information
• Searching for a patient
• Reviewing a patient exam
• Reviewing an image
• Deleting a patient, exam, or image
Clipboard
The clipboard displays thumbnail images of the acquired data
for the current exam. Images from other exams are not
displayed on the current patient’s clipboard.
The active image is stored and placed on the clipboard when
you press the print key (this assumes that you have already set
up a print key to do this). The clipboard contains preview images
with enough resolution to clearly indicate the contents of the
image. If an image has a triangle indicator on the lower, left-
hand corner, then something has been done to the image
(printed, sent to DICOM, etc.). Single images are indicated by a
‘1’; CINE Loops have no special identifier.
The clipboard fills from left to right, starting in the upper, left-
hand corner. Once the top row is full, the second row starts to fill.
Once both rows are full, the next image stored starts to fill a
‘third’ row (the first row disappears from the clipboard display,
with the second row now becoming the first row, and the third
row now becoming the second row).