GE LOGIQ 7, Basic User Manual

Page: 376 / 984

General Measurements and Calculations
7
-
70 LOGIQ 7 Basic User Manual
Direction 2392206-100 Rev. 1
To edit a worksheet
To change data on a worksheet:
1. To position the cursor at the field you want to change, move
the Trackball .
The field is highlighted.
2. Press Set .
3. Type the new data in the field.
The new data is displayed in blue to indicate that it was
manually entered.
To delete or exclude data on a worksheet:
1. To position the cursor at the field you want to delete or
exclude, move the Trackball .
The field is highlighted.
2. Do one of the following:
• To delete the field, select Delete Value .
• To exclude the field, select Exclude Value .
The data in the field is not visible and is not included in
worksheet calculations.
• To include a value that you previously excluded, select
Exclude Value .
To type a comment on a worksheet:
1. Select Examiner’s Comments .
The Examiner’s Comments window opens.
2. Type comments about the exam.
3. To close the Examiner’s Comments window, select
Examiner’s Comments .
HINTS
Some fields on the worksheet are view only, and others you
can change or select. To easily see which fields you can
change or select, move the
Trackball . As the cursor moves
over a field that you can change or select, the field is
highlighted.