GE KTC-CBH24, User Manual, Page: 6 / 16

Installing the Bracket and Camera Bullet Camera User Manual
C
HOOSING AN
I
NSTALLATION
L
OCATION
Consider the field of view for the camera and the range of the LED
illuminators when you select an installation location.
•
The LED illuminators are effective in nighttime conditions to
approximately 33 feet (10.1 m).
•
See Table 1 for field of view information.
Table 1. Example approximate fields of view
Distance from camera Horizontal Vertical
5 ft (1.5 m)
4 ft (1.2 m) x 3 ft (0.9 m)
10 ft (3 m)
8 ft (2.4 m) x 6 ft (1.8 m)
15 ft (4.6 m)
12 ft (3.7 m) x 9 ft (2.7 m)
20 ft (6.1 m)
16 ft (4.9 m) x 12 ft (3.7 m)
Note: The Bullet Camera has a 1/3-inch CCD and 6.0 mm lens.
M
OUNTING THE
B
RACKET
Figure 6. Removing the top of the
bracket from the mounting plate
1) Loosen the wing nut and remove
the top of the bracket as shown in
Figure 6.
2) Place the back of the bracket
against the vertical or horizontal
mounting surface and mark the
location of the three mounting
holes.
Note: The camera comes with fasteners
and anchors; use them only if they are
appropriate for the type of mounting surface.
3) Prepare the mounting holes
appropriately according to the type
of surface (concrete, wood, etc.)
and fasteners used.
6 ptember 2003
1043349A
/ Se