13
KSA700 Series User Guide
Event: 1 of 1 at 00:00
**RELAYS DISABLED**
Panel: 1
If sounders or relays are disabled the fire panel will activate its internal buzzer to warn
that outputs have been disconnected. The internal buzzer can be silenced using the
Silence Buzzer
or
Mute
key.
Outputs may be enabled again following the same procedure in the
Enable Menu
.
3.2.5 Print
The
option in the
Main Menu
allows the operator to print system information using
the built-in printer (KSA702P and KSA705P only) or an external printer connected to the
panel.
[PRINT]
[#
Exit]
1. Devices
4. Disabled
2. History
5. Options
3. Mode
•
Devices:
Print the status of devices connected to a loop and the text assigned to
each.
•
History:
The system records a history of events. It is possible to print all of these
events or only part of them (e.g. the events of the last week).
•
Mode:
The printer may be in one of three modes:
•
Auto:
This is the default and recommended mode. A short report is printed for
every system event.
•
Manual:
Prints only when the user decides to print.
•
OFF:
The printer is switched off.
•
Disabled:
Print a list of all disabled devices.
•
Options:
To select the port used by the printer.
3.2.6 View
The
View
option in the
Main Menu
allows the operator to check the current status of
selected devices in the installation.
[VIEW]
[#
Exit]
1. Devices
4. Outputs
2. History
5. Disabled
3. Faults
6. Events
Device:
This displays the status of a single device on a loop. The loop number and
device address must be entered to view the device details.
