background image

0150-0255C 

4-7 

Kalatel VDR 

Main Menu 

 Display Settings 

 Record Capacity 

OFF 

ON

 

 

Select 

ON

, to display the amount of time remaining before the hard disk runs out of record 

space.  The data is displayed near the upper left hand corner of the primary monitor.  The unit 
displays the Record Capacity with two measures of time, and switches automatically 
depending on the amount of time remaining: 

• 

Days and Hours 

• 

Hours and Minutes 

• 

Minutes and Seconds 

Use the 

Arrow buttons

 to select 

ON

 or 

OFF

Press the 

Enter

 button to confirm the selection and exit the menu. 

--OR— 

Press the 

Menu

 button to exit the menu without making changes. 

 

 

Main Menu 

 Display Settings 

 Last Alarm 

OFF 

ON

 

To display the time and date of the last alarm, near the upper right hand corner of the primary 
monitor, select 

On

.  The unit will display 

NONE

 if there is no previous record of an alarm. 

Use the 

Arrow buttons

 to select 

On

 or 

Off

Press the 

Enter

 button to confirm the selection and exit the menu. 

--OR— 

Press the 

Menu

 button to exit the menu without making changes. 

 

 

Main Menu 

 Display Settings 

 Record Playback Speed 

OFF 

ON

 

To display the Record or Playback Speed, near the lower right hand corner of the primary 
monitor, select 

On

.  The unit will display 

NONE

 if there is no previous record of an alarm. 

Use the 

Arrow buttons

 to select 

On

 or 

Off

Press the 

Enter

 button to confirm the selection and exit the menu. 

--OR— 

Press the 

Menu

 button to exit the menu without making changes. 

 

 

Main Menu 

 Display Settings 

 Playback Time / Date 

OFF 

ON

 

To display the time and date the recording was made (during playback) select 

On

.  The data is 

displayed near the upper right hand corner of the screen. 

Use the 

Arrow buttons

 to select 

On

 or 

Off

Press the 

Enter

 button to confirm the selection and exit the menu.  

--OR— 

Press the 

Menu

 button to exit the menu without making changes. 

 

 

Summary of Contents for Kalatel 0150-0255C























































Reviews: