Questions? Call 1.800.561.3344
or Visit our Website at:
GEAppliances.ca
READ CAREFULLY.
KEEP THESE INSTRUCTIONS
.
Installation
Built-In Trim Kits
Instructions
JX1124STC
❒
BEFORE YOU BEGIN
FOR YOUR SAFETY:
WARNING –
Before beginning the
installation, switch power off at service panel and lock
the service disconnecting means to prevent power
from being switched on accidentally. When the service
disconnecting means cannot be locked, securely fasten
a prominent warning device, such as a tag, to the
service panel.
1
Read these instructions completely and carefully.
•
IMPORTANT –
Save these instructions for local
inspector’s use.
•
IMPORTANT –
Observe all governing codes and
ordinances.
•
Note to Installer –
Be sure to leave these instructions with the
Consumer.
•
Note to Consumer –
Keep these instructions for future
reference.
•
For easier installation and personal safety, we recommend that
two people install this microwave oven.
WARNING –
This oven must be plugged into a properly
grounded 3-hole, 120V receptacle as required by the National
Electrical Code.
•
Do not alter or modify any part of this kit or the oven.
•
Unplug the microwave oven before attempting installation of
this kit.
•
Skill level
– Installation of this appliance requires basic
mechanical and electrical skills.
•
Completion time
– Less than 1 hour
•
Proper installation is the responsibility of the installer.
•
Product failure due to improper installation is not covered
under the Warranty.
•
This kit is cUL listed for installation alone. Not for use adjacent
to (within 2 feet of) any gas or electric range, cooktop or oven.
•
This kit is for use on model: JE1140 STC.
PARTS
Number
Part
Quantity
1
Screw, M4 x 10
4
2
Customer Supplied Cabinet
Not Included
3
Microwave Oven
Not Included
4
Lower Exhaust Guide
1
5
Screw M4 x 8
7
6
Trim Piece
1
7
Screw M3 x 20
4
8
Upper Exhaust Guide
1
