GE JVM190K, Use And Care Manual

Page: 20 / 48

BY
(continued)
Questions and Answers
Q. Are there any foods I can’t Temp Cook? Q. Can I leave my probe in the oven if it’s not
A. Yes.
Delicate butter icings, ice cream, frozen
inserted in food?
whipped toppings, etc., soften rapidly at warm
A. No, if it touches the oven wall, it may damage
temperatures. Batters, doughs and frozen foods are the oven.
also difficult to cook precisely with the probe. It’s
best to Time Cook these foods.
Q. Can I Temp Cook different
portions of food at
different temperatures?
Q. Why did flash on the display after I
touched the START pad?
A. Yes. The
temperature probe gives you the freedom
to cook different portions of food at different
A. will flash if you don’t seat the cable
temperatures to suit individual eating styles.
end of the probe securely into the receptacle Simply place probe in food and change
in the oven or if you touch the TEMP
temperature setting as needed.
pad and forget to use the probe.
AUTO DEFROST
With the Auto Defrost feature, the oven
When the oven reaches approximately half of the total
automatically sets the defrosting time and power defrosting time, the display flashes telling
for you. You choose the appropriate code you to turn food over and will not continue defrosting
number from 1 to 6 for the food you are defrosting,
until door is opened and START is touched again.
then enter the food weight in pounds and tenths of
After defrosting time is complete, the oven
a pound (See Conversion Guide on next page) and
touch START. The oven calculates the defrosting time
automatically turns off.
and changes power during defrosting to give
even defrosting results.
How to Set Auto Defrost
NOTE:
Before you begin, check the Automatic
Defrosting for minimum and maximum food
Step
5: Touch START pad. Defrost
time begins counting down on
weights code number. You need to know
your food weight and corresponding code before
beginning.
Step
1:
Remove frozen meat from package and
in microwave-safe dish. Place in oven and close door.
AUTO
Step
2: Touch AUTO DEFROST
pad.
Step 6:
When 1/2
the defrosting time is
completed, the oven
signals and
flashes on display
instead of time counting
down. Open door and
turn package over.
Step
7:
Close door and touch the START pad. Display
shows remaining defrosting time counting down.
Step
4: Touch number pad 3 and O for weight of 3
Step
8: When defrosting
time is completed, oven
signals, “End” flashes,
and oven turns off.
20