GE JP950 Owner'S Manual Download Page 13

Page: 13 / 20

Allow the cooktop to cool.

Use a single-edge razor blade
scraper at approximately a 45°
angle against the glass surface
and scrape the soil. It will be
necessary to apply pressure to
the razor scraper in order to
remove the residue.

After scraping with the razor
scraper, spread a few drops of
CERAMA BRYTE

Ceramic

Cooktop Cleaner on the entire

burned residue area. Use the
CERAMA BRYTE

Cleaning Pad to

remove any remaining residue.

For additional protection,
after all residue has been
removed, polish the entire
surface with CERAMA BRYTE

Ceramic Cooktop Cleaner
and a paper towel.

Cleaning the glass cooktop.

www.GEAppliances.com

Safety Instructions

Operating Instructions

Care and Cleaning

oubleshooting T

ips

Consumer Support

Control Lock Pad

As a convenience, you can lock the
entire cooktop at any time when it is
not in use or before cleaning.

Locking the cooktop will prevent
surface elements from being turned
on accidently.

Begin by locking the cooktop; see
the

Locking the Cooktop

section. Use

the same cleaning methods as those
described for the glass-ceramic top.

CONTROL

LOCK

CONTROL

LOCK

Burned-On Residue

WARNING:

DAMAGE to your glass surface

may occur if you use scrub pads other than the
pad included with your cooktop.

Allow the cooktop to cool.

Spread a few drops of CERAMA
BRYTE

Ceramic Cooktop Cleaner

on the entire burned residue area.

Using the included CERAMA
BRYTE

Cleaning Pad for Ceramic

Cooktops, rub the residue area,
applying pressure as needed.

If any residue remains, repeat the
steps listed above as needed.

For additional protection, after all
residue has been removed, polish
the entire surface with CERAMA
BRYTE

Ceramic Cooktop Cleaner

and a paper towel.

The CERAMA BRYTE

Ceramic

Cooktop Scraper and all
recommended supplies are
available through our Parts Center.
See instructions under “To Order
Parts” section on next page.

NOTE:

Do not use a dull or

nicked blade.

Heavy, Burned-On Residue

Use a CERAMA BRYTE

Cleaning

Pad for Ceramic Cooktops.

Normal Daily Use Cleaning

ONLY

use CERAMA BRYTE

Ceramic

Cooktop Cleaner on the glass cooktop.
Other creams may not be as effective.

To maintain and protect the surface of
your glass cooktop, follow these steps:

Before using the cooktop for the
first time, clean it with CERAMA
BRYTE

Ceramic Cooktop Cleaner.

This helps protect the top and
makes cleanup easier.

Daily use of CERAMA BRYTE

Ceramic Cooktop Cleaner will help
keep the cooktop looking new.

Shake the cleaning cream well.
Apply a few drops of CERAMA
BRYTE

Ceramic Cooktop Cleaner

directly to the cooktop.

Use a paper towel or CERAMA
BRYTE

Cleaning Pad for Ceramic

Cooktops to clean the entire
cooktop surface.

Use a dry cloth or paper towel
to remove all cleaning residue.
No need to rinse.

NOTE:

It is very important that you DO NOT

heat the cooktop until it has been cleaned
thoroughly.

Clean your cooktop after
each spill. Use CERAMA
BRYTE

Ceramic Cooktop

Cleaner.

Summary of Contents for JP950





















Search results

Summary of Contents for JP950

Reviews:

Brands by name

Popular brands

GE JP950, Owner'S Manual

Search results

Summary of Contents for JP950

Reviews:

Brands by name

Popular brands