JP389WJ/BJ – GE Select-Top
™
Modular Downdraft Cooktop
Specification Created 6/04
321118
GE Appliances
GE Appliances
Cutout Dimensions (in inches)
Preparing the Cabinet for Installation
Note:
In some cabinets, the sides may need to be scooped or cut down 2" as shown and the corner
braces removed in order to accommodate the cooktop.
Wall Installation:
Wall installations require 25" countertop depth. When cabinet is flush against
the wall, the fan housing can be rotated to the horizontal position for direct venting through rear wall.
Make a countertop cutout that is centered in the range cabinet according to unit dimensions and
installation type. Duct hole is positioned in back of cabinet for through-the-wall ducting.
Peninsula or Island Installation:
For peninsula or island installation, a minimum 26" countertop
depth is suggested. Blower should be in vertical position. Island or peninsula cabinets may require
adjustment in cutout depth and/or location within the width dimensions. Duct hole is positioned in
bottom of cabinet for island or peninsula installation.
Slab Installation:
For peninsula or island installation and rear wall ducting,
PVC duct or locally-
approved piping should be used if installing under a poured concrete slab.
Installing the Ductwork:
Use minimum 26-gauge galvanized or 24-gauge aluminum duct in 6"
round or 3-1/4" x 10" size, or combination of both.
PVC duct or locally approved piping should
be used if installing under a poured concrete slab.
25
1-7/8"
MIN. Required*
20-5/8
Cut-out Dimensions (in inches)
28-7/8
*U.L. Requirement.
Note:
A 6" minimum spacing to adjacent side wall is required
9-3/8
9-3/8
15-3/4
7-9/16
Rear wall venting (in inches)
Downward venting
(in inches)
2" Approx.
5" Approx.
for European
cabinets
25
1-7/8"
MIN. Required*
20-5/8
Cut-out Dimensions (in inches)
28-7/8
*U.L. Requirement.
Note:
A 6" minimum spacing to adjacent side wall is required
9-3/8
9-3/8
15-3/4
7-9/16
Rear wall venting (in inches)
Downward venting
(in inches)
2" Approx.
5" Approx.
for European
cabinets
25
1-7/8"
MIN. Required*
20-5/8
Cut-out Dimensions (in inches)
28-7/8
*U.L. Requirement.
Note:
A 6" minimum spacing to adjacent side wall is required
9-3/8
9-3/8
15-3/4
7-9/16
Rear wall venting (in inches)
Downward venting
(in inches)
2" Approx.
5" Approx.
for European
cabinets
25
1-7/8"
MIN. Required*
20-5/8
Cut-out Dimensions (in inches)
28-7/8
*U.L. Requirement.
Note:
A 6" minimum spacing to adjacent side wall is required
9-3/8
9-3/8
15-3/4
7-9/16
Rear wall venting (in inches)
Downward venting
(in inches)
2" Approx.
5" Approx.
for European
cabinets
R
Listed by
Underwriters
Laboratories
For answers to your Monogram,
®
GE Profile
™
or
GE appliance questions, visit our website at
GEAppliances.com or call
GE Answer Center
®
service, 800.626.2000.
