
temperature is the best test
doneness for many foods. TEMP
COOK takes the guesswork out of cooking because the oven automatically
switches the Hold setting after reaching the preset food temperature and
maintains that temperature until you either open the door
press the
CLEAR/OFF pad.
The Temperature Probe
The temperature probe is a food
thermometer that gauges the
internal temperature of your food:
it must be used when using the
Temp Cook or Auto Roast
microwave oven functions.
A temperature probe has been
provided for use in your new
microwave oven.
Temperature probes provided with
other products, such as those used
for ovens, are designed to
withstand high temperatures.
Use of probes other than the one
provided with this
may
To use your probe properly
result in damage to the probe.
in a roast, see the Automatic
Roasting section.
How to Temp Cook a Rolled Beef Rib Roast to Medium
1. Insert the temperature probe into the roast and
attach the
end of the probe securely into
the receptacle in the oven wall. Close the door.
2. Press the TEMP COOK/HOLD pad.
COOK
3. Press 1, and 5 to set
m
4. Press the POWER LEVEL pad.
Press 5 to set medium Dowel”.
LEVEL
,
5. Press the START pad. If the internal
START
temperature
of the
roast is less than
the display will show “COOL”;
if the roast’s internal temperature is
or above, the display
the
temperature counting up.
When
is reached, the oven control signals
and
will be on the display. The oven will
then hold the temperature.
7. Press the CLEAR/OFF pad to stop the cycle.
8. Remove the probe and the roast from the oven
Cooking Tips
●
Use a lower power level; it wi 11 heat
more
●
Be sure frozen food
been completely defrosted
evenly though requiring more time.
before inserting probe. The probe may break off if
●
for moisture control and quick,
you attempt to push it into frozen foods.
even heating.
Questions and Answers
Q. After I followed the steps and pressed the
START pad “ERROR” flashed on the display
and the oven control signaled. What’s wrong?
A. “ERROR” flashes if
set the temperature either
below
or above
The oven tells
between the
“ERROR,”
incorrect
entry was made. To re-enter, press the CLEAR/OFF
pad and begin
Q. Why did “PRObE” flash after I touched the
START pad?
A. “PRObE” will flash if you don’t seat the cable end
of the probe securely into the receptacle in the
oven wall or if you press the TEMP
pad and forget to use the probe.
Q. Can I leave my probe in the oven if it’s not
inserted in the food?
A. No, if it touches the oven wall, damage may
occur to the probe and oven.
17