FEATURES OF YOUR OVEN CONTROL
1. CLEAR/OFF. Press this pad to cancel all oven
operations except clock and timer.
2. PROGRAM STATUS. Words light up in the
display to indicate what is in time display.
Programmed information can be displayed at any
time by pressing the pad of the operation you want
to see. For example, you can display the current
time of day while the timer is counting down by
pressing the CLOCK pad.
3. TIME DISPLAY. Shows the time of day, the times
set for the timer or automatic oven operation.
4. OVEN TEMPERATURE AND BROIL
DISPLAY. Shows the oven temperature or the
broil setting selected.
5. FUNCTION INDICATORS. Lights up to
show whether oven is in the bake, broil or
clean mode.
6. INCREASE. Short taps to this pad increase the
time or temperature by small amounts. Press and
hold the pad to increase the time or temperature by
larger amounts.
7. DECREASE. Short taps to this pad decrease
the time or temperature by small amounts. Press
and hold the pad to decrease the time or
temperature by larger amounts.
8. BAKE. Press this pad to select the bake function.
9. BROIL. Press this pad to select the broil function.
10. CLEAN. Press this pad to select the self-cleaning
function. See the Operating the Self-Cleaning
Oven section.
11.
COOK TIME. Press this pad for Timed Baking
operations.
12. STOP TIME. Use this pad along with the COOK
TIME or CLEAN pad to stop automatically at a
time you select.
13. CLOCK. To set clock, first press the CLOCK pad.
Then press the INCREASE or DECREASE pad to
change the time of day. Press the clock pad to start.
14. TIMER ON/OFF. Press this pad to select the
timer function.
To set the timer, first press the TIMER ON/OFF
pad. Then press the INCREASE or DECREASE
pad to change the time.
To cancel the timer, press and hold the TIMER
ON/OFF pad until the word “TIMER” disappears
from the display.
If “F-” and a number flash in the display
and the oven control signals, this indicates
function error code. Press the CLEAR/OFF pad.
Allow the oven to cool for one hour. Put the oven
back into operation. If the function error code
repeats, disconnect the power to the range and call
for service.
12
