20
Operating Instructions
Safety Instructions
Care and Cleaning
Troubleshooting T
ips
Consumer Support
QCC1
¤
NEW OPD
HANDWHEEL
O
P
EN
C
LO
S
E
LP-G AS
OP D
About the LP gas tank (not included – obtain locally).
LP Gas Tank Requirements
CAUTION:
1.
All LP gas tanks used with this grill
must be constructed and marked with
the specifications for LP Gas Tanks in
accordance with the U.S. Department
of Transportation (DOT) for use in
the USA.
2.
The LP gas tank used for this grill
must
not
have a capacity larger than
20 lb.(9 kg).
Approximately: 18
″
(46 cm) high
12
″
(31 cm) diameter
3.
All LP gas tanks used with this grill
should be inspected at every filling
and re-qualified by a licensed service
outlet at the expiration date
(10 years), in accordance with the
DOT (USA) codes for LP Gas Tanks.
4.
All LP gas tanks used with this grill
must be provided with a shutoff valve
terminating in a tank valve outlet
No. 510, specified in the Standard for
Compressed Gas Tank Valve Outlet
and Inlet Connection (USA) ANSI.
■
The tank supply system must be
arranged for vapor withdrawal.
■
The tank must include a collar to
protect the tank valve.
■
The tank valve must include
a safety relief device having direct
communication with the vapor
space of the tank.
LP Gas Tank Safety
CAUTION:
1. NEVER
connect your gas grill to
an LP gas tank without the regulator
provided, and
NEVER TO AN
UNREGULATED LP GAS SUPPLY
.
The gas regulator supplied with the
grill must be used.
2. ALWAYS
leak test the LP gas tank
to regulator connection when
connecting the LP gas tank to the
grill. See the
Leak Testing
section.
3. DO NOT
operate the grill if the smell
of LP gas is present. Extinguish all
flame and determine source of LP gas
before proceeding. See the
Leak
Testing
section.
DO NOT
ignite the grill
until the LP gas leak has been found
and sealed.
4. ALWAYS
turn the gas off by closing
the LP tank valve when the grill is
not in use.
