manualshive.com logo in svg

GE JGBP75, Use And Care & Installation Manual, Page: 45 / 48

Share
Download
GE JGBP75 Use And Care & Installation Manual Download Page 45

45

Befor

e Y
ou Call for Service

PROBLEM

POSSIBLE CAUSE

CLOCK DOES NOT WORK

• Range electrical plug must be securely seated in a live power outlet. Check for

blown fuse or tripped circuit breaker.

OVEN LIGHT DOES NOT

• Bulb may be loose or burned out.

COME ON

• Electrical plug must be plugged into a live power outlet.

NIGHT LIGHT DOES

• Fluorescent bulb is loose or defective. Adjust or replace.

NOT WORK

• Switch operating the light is broken. Call for service.

OVEN WILL NOT WORK

• Plug on the range is not completely inserted in the electrical outlet.
• Pilot(s) is (are) not lit (on standing pilot models). See the Lighting Instructions  

for Standing Pilot Models in Using Your Oven.

• The circuit breaker in your house has been tripped, or a fuse has been blown.
• Oven controls not properly set.

OVEN TEMPERATURE

• The oven thermostat needs adjustment. See the Adjust the Oven 

TOO HOT OR TOO COLD

Thermostat—

Do It Yourself section.

FOOD DOES NOT ROAST

• Oven controls not properly set. See the Baking or Roasting section.

OR BAKE PROPERLY

• Shelf position is not correct.
• Incorrect cookware or cookware of improper size is being used.
• The oven thermostat needs adjustment. See the Adjust the Oven Thermostat—

Do It Yourself section.

• Clock not set correctly.
• Oven bottom not securely seated in position.

FOOD DOES NOT

• Oven controls not properly set. See the Broiling section.

BROIL PROPERLY

• Oven door not closed.
• Improper shelf position being used. See the Broiling section.
• Food is being cooked on a hot pan.
• Cookware is not suited for broiling.
• Aluminum foil used on the broiler pan grid has not been fitted properly

and slit as recommended.

• Oven bottom not securely seated in position.

OVEN WILL NOT 

• Oven temperature is too high to set self-clean operation. Allow the range to 

SELF-CLEAN

cool to room temperature and reset the controls.

• Door latch handle not moved all the way to the right.

OVEN DOOR WILL 

• Oven must cool below locking temperature. Do not lock the door with

NOT UNLOCK

door latch except when using self-clean feature or the oven may lock.

OVEN NOT CLEAN AFTER

• Oven controls not set properly. See Operating the Self-Cleaning Oven section.

CLEAN CYCLE

• Heavily soiled oven requires 3

1

⁄

2

to 4 hours of cleaning time.

• Heavy spillovers should be cleaned up before starting clean cycle.

(continued next page)

Summary of Contents for JGBP75

















































Reviews:

No comments