background image

 US 

 YOU...

Read this guide carefully.

It is intended to help you operate and maintain your
new range properly.
Keep it handy for answers to your questions.
If you don’t understand something or need more
help, call:

 Answer 

800.626.2000
24 hours a day, 7 days a week

Write down the model and serial numbers.

Depending on your range, you’ll 

 the model and

serial numbers on a label on the front of the range,
behind the kick panel, storage drawer or broiler drawer.
These numbers are also on the Consumer Product
Ownership Registration Card that came with your
range. Before sending in this card, please write these
numbers here:

Model Number

Serial Number

Use these numbers in any correspondence or service
calls concerning your range.

If you received a damaged range...

Immediately contact the dealer (or builder) that sold
you the range.

Save time and money. Before you
request service . . .

Check the Problem Solver in the back of this guide.
It lists causes of minor operating problems that you
can correct yourself.

● 

INJURY TO PERSONS

COULD RESULT

● 

INSTALL ANTI-TIP

DEVICES PACKED
WITH RANGE

● 

SEE INSTALLATION

INSTRUCTIONS

2

WARNING: If the information in this
guide is not followed exactly, a fire or
explosion may result causing property
damage, personal injury or death.

— Do not store or use gasoline or other

flammable vapors and liquids in the

vicinity of this or any other appliance.

— WHAT TO DO IF YOU SMELL GAS

● 

Do not try to light any appliance.

● 

Do not touch any electrical switch; do

not use any phone in your building.

● 

Immediately call your gas supplier from

a neighbor’s phone. Follow the gas

 instructions. .

● 

If you cannot reach your gas 

call the fire department.

— Installation and service must be

performed by a qualified installer, service
agency or the gas supplier.

 YOU NEED SERVICE

To obtain service, see the Consumer Services page in
the back of this guide.

To obtain replacement parts, contact 

Service Centers.

We’re proud of our service and want you to be
pleased. If for some reason you are not happy with the

service you receive, here are three steps to follow for
further help.

FIRST, contact the people who serviced your
appliance. Explain why you are not pleased. In most
cases, this will solve the problem.

NEXT, if you are still not pleased, write all the
details—including your phone number—to:

Manager, Consumer Relations
GE Appliances
Appliance Park
Louisville, KY 40225

FINALLY, if your problem is 

 not resolved, write:

Major Appliance Consumer Action Panel
20 North 

 Drive

Chicago, IL 60606

Summary of Contents for JGBC18

















































Reviews: