GE JG5P34 Use And Care & Installation Manual Download

Page: 34 / 54

FOR YOUR SAFETY

smell gas:

1. Open windows.

2. Don’t touch electrical switches.
3.

any open flame.

4. Immediately call your gas supplier.

FOR YOUR SAFETY

Do not store or use combustible
materials, gasoline or other flammable

vapors and liquids in the vicinity of this

or any other appliance.

BEFORE YOU

Read these instructions completely and
carefully.

Save these instructions

for the local electrical inspector’s use.

Leave these instructions

the appliance

installation is

completed.

CONSUMER:

this Use and Care

and the Installation Instructions

for

future use.

must be properly grounded.

WARNING

Improper installation, adjustment,
alteration, service or maintenance can
cause injury or property damage. Refer to
this guide. For assistance or additional
information, consult a qualified installer,
service agency, manufacturer

the gas supplier.

Do not attempt to operate the oven
of this range during a power failure
(Electric Ignition models only).

IMPORTANT

Remove all

material and

literature from oven before connecting
gas and electrical supply to range.

DIMENSIONS AND CLEARANCES

Provide adequate clearances

the range ‘

and adjacent combustible surfaces.

Depth with Door Closed

, (Includes Door Handle):

Depth with

‘\

Door Open:

46%”

Summary of Contents for JG5P34























































Search results

Summary of Contents for JG5P34

Reviews:

Related manuals for JG5P34

Brands by name

Popular brands

GE JG5P34, Use And Care & Installation Manual

Search results

Summary of Contents for JG5P34

Reviews:

Related manuals for JG5P34

Brands by name

Popular brands