
●
QUESTIONS?
USE THIS PROBLEM SOLVER
PROBLEM
OVEN WILL NOT
COME ON
CONTROL PANEL
LIGHTED, YET OVEN
WILL NOT START
“PRObE” APPEARS
ON DISPLAY
“Error” APPEARS
ON DISPLAY
“HOT” APPEARS
ON DISPLAY
POSSIBLE CAUSE
A fuse in your home may be blown or the circuit
tripped. Replace fuse or
reset circuit breaker.
●
Set the circuit breaker to the off position. Wait 30 seconds. Reset the circuit breaker
to the on position.
●
Door not securely closed.
●
START pad must be touched after entering cooking selection.
●
Another selection entered already in oven and
pad not touched
to cancel it.
●
Make sure you have entered cooking time or temperature after touching
MICRO COOK or
pads.
●
pad was touched accidentally. Reset cooking program and touch
START pad.
●
Temperature probe not inserted properly or not being used during Combination
Roast or
Cook/Hold.
●
Make sure you have entered a desired finished food temperature or oven temperature
after setting temperature cooking programs.
●
Make sure you have entered a code number after touching SENSOR COOK.
●
Temperature probe is missing or not plugged in securely when using cooking
functions that measure food temperature.
●
Temperature probe is inserted for a program that does not use the probe.
●
During Sensor Cook, Sensor Reheat, Sensor Beverage or Sensor Popcorn program,
the door was opened before steam could be detected, or steam was not detected in
maximum time.
●
This is normal when the temperature inside the oven is greater than 200 degrees
and the door is opened.
●
One of the sensor cooking pads was touched when the temperature inside the oven
was greater than 200 degrees. These features will not operate when the oven is hot.
All these things are normal with your microwave oven:
●
Dimming oven light and change in blower sound
●
Steam or vapor escaping from around the door.
may occur while operating at power levels other
than high.
●
Light reflection around door.
●
During cooking you will hear “cracking” and
●
Dull, thumping sound while oven is operating.
“popping” noises which are nothing more than
●
Some TV-Radio interference might be noticed while
normal expansion of the oven.
using your microwave oven. It’s similar to the
●
At the end of microwave cycles you will hear a
interference caused by other small appliances and
does not indicate a problem with your oven.
slight thump. This is normal.
If you need more
free: GE Answer Center
@
/ 800.626.2000/ consumer information service
32
Summary of Contents for JEB1090
Page 33: ...NOTES 33 ...