2.
a four-wire electrical system
(mobile home):
Remove the screws and
the
block cover.
B. Remove the ground strap
the
terminal block and from the
frame.
the ground screw.
C. Connect the ground wire
of the
copper power supply cord to the frame of
the
with the ground screw, using
the hole in the frame where the ground
strap was removed.
2.
D. Connect the
(white) wire of the
copper power supply cord to the center
colored
of the
block and connect the other wires to the
outer
E. Replace the
block cover.
FIGURE
2
CORD.
To
the
of reaching overheated
surface elements,
or storage spaces
should not be provided over a range.
are provided, the
can be
reduced by
a
hood that projects
a minimum of 5“ beyond the
of the cabinets.
the range between base cabinets,
refer to figure below for the
of the opening
needed. Do not
the range to cabinets.
unpacking the range, do not
the 4 shipping
as these are the
legs.
service cord is used, the
receptacle
should be located in accordance with the
dimensions below.
Of Range
I
I
Wall
(40” Range)
32
