75
Cleaning the glass cooktop.
(on some models)
Normal Daily Use Cleaning
Clean your cooktop after each
spill. Use Ceramic Cooktop
Cleaner.
Burned-On Residue
WARNING: DAMAGE to your glass surface may occur if you use scrub
pads other than those recommended.
Heavy Burned-On Residue
The Ceramic Cooktop Scraper
and all recommended supplies
are available through our deal-
ers or through a Camco Parts
Store.
Note:
Do not use a dull or
nicked blade.
ONLY
use Ceramic Cooktop Cleaner on the glass
cooktop. Other types of cleaners may not be as
effective.
To maintain and protect the surface of your glass
cooktop, follow these steps.
1. Before using the cooktop for the first time,
clean it with Ceramic Cooktop Cleaner. This
helps protect the top and makes cleanup
easier.
2. Daily use of Ceramic Cooktop Cleaner will
help keep the cooktop looking new.
3. Shake the cleaning cream well. Apply a few
drops of Ceramic Cooktop Cleaner directly to
the cooktop.
4. Use a paper towel for Ceramic Cooktops to
clean the entire cooktop surface.
5. Use a dry cloth or paper towel to remove all
cleaning residue. No need to rinse.
NOTE:
It is very important that you DO NOT heat
the cooktop until it has been cleaned thoroughly.
Safety Ins
tr
uctions
Operating
Ins
tructions
Car
e and Cleaning
Tr
oubleshooting T
ip
s
Consumer S
up
por
t
Ins
tallation
Ins
tr
uctions
1. Allow the cooktop to cool.
2. Spread a few drops of Ceramic Cooktop
Cleaner on the entire burned residue area.
3. Using the included Cleaning Pad for Ceramic
Cooktops, rub the residue area, applying pres-
sure as needed.
4. If any residue remains, repeat the steps listed
above as needed.
5. For additional protection, after all residue has
been removed, polish the entire surface with
Ceramic Cooktop Cleaner and paper towel.
Use a Cleaning Pad for Ceramic
Cooktops.
1. Allow the cooktop to cool.
2. Use a single-edge razor blade scraper at ap-
proximately a 45º angle against the glass sur-
face and scrape the soil. It will be necessary to
apply pressure to the razor scraper in order to
remove the residue.
3. After scraping with the razor scraper, spread a
few drops of Ceramic Cooktop Cleaner on the
entire burned residue area. Use the Cleaning
Pad to remove any remaining residue.
4. For additional protection, after all residue has
been removed, polish the entire surface with
Ceramic Cooktop Cleaner and a paper towel.
Summary of Contents for JCAP750
Page 46: ...46 ...
