Operating Instructions
Safety Instructions
Care and Cleaning
Installation Instructions
Troubleshooting T
ips
16
International Installation Instructions.
(220–240, 50/60Hz, 2-wire)
Read these instructions completely and carefully.
Before You Begin
IMPORTANT:
Save these instructions for the local
electrical inspector’s use.
IMPORTANT: OBSERVE ALL GOVERNING CODES
AND ORDINANCES.
NOTE TO INSTALLER:
Leave these instructions
with the appliance after installation is completed.
NOTE TO CONSUMER:
Keep this Owner’s Manual
and Installation Instructions for future use.
NOTE:
This appliance must be properly grounded.
Tools You Will Need
■
Large blade screwdriver
■
6 mm (1/4
″
)hex head nutdriver
■
Channel lock pliers
■
3/16
″
open-end or socket wrench
■
1
3
⁄
8
″
open-end or adjustable wrench
■
Tape measure
Electrical Requirements
CAUTION, FOR PERSONAL SAFETY:
DO NOT USE
AN EXTENSION CORD WITH THIS APPLIANCE.
REMOVE HOUSE FUSE OR OPEN CIRCUIT
BREAKER BEFORE BEGINNING INSTALLATION.
This appliance must be supplied with the proper
voltage and frequency, and connected to an
individual, properly grounded branch circuit,
protected by a circuit breaker or time delay fuse,
as noted on the rating plate.
Wiring must conform to National Electric Codes.
If the electric service provided does not meet the
above specifications, have a licensed electrician
install an approved outlet.
Because range terminals are not accessible after
range is in position, flexible service conduit or cord
must be used.
