background image

21

T

imed Baking

To avoid possible burns, place the shelves in the
correct position before you program the oven.

You can set the oven control to delay-start the oven,
cook for a specific length of time and then turn off
automatically.

For example: Let’s say it’s 2:00 and dinner time 
is shortly after 7:00. The recipe suggests 3 hours
cooking time at 325°F.

1. Press the COOK TIME ON/OFF pad.

2. For 3 hours of cooking time, press 

the HOUR pad until “3:00” appears 
in the display.

3. Press the START TIME ON/OFF pad.

4. Press the HOUR pad until “4:00” appears in the

display. The timer is now set to start baking in 
2 hours, at 4:00.

5. Turn the Oven Temperature knob to the desired

temperature (in this example 325°F.).

The oven is now set to start at 4:00 and cook 
for 3 hours at a temperature of 325°F. At the 
end of the 3 hour cooking time (7:00), the oven 
will automatically turn off. When the oven
automatically turns off the AUTOMATIC OVEN
light will flash and the oven will signal. Turn the
oven control to OFF to stop the flashes and signal.

6. Remove the food from the oven. Remember, 

even though the oven shuts off automatically, 
foods continue cooking after controls are off.

NOTE: 

• The low temperature zone of this range (between

WARM and 200°F.) is available to keep hot cooked
foods warm. Food kept in the oven longer than 
two hours at these low temperatures may spoil.

• Foods that spoil easily such as milk, eggs, fish,

stuffings, poultry and pork should not be allowed 
to sit for more than one hour before or after cooking.
Room temperature promotes the growth of harmful
bacteria. Be sure that the oven light is off because heat
from the bulb will speed harmful bacteria growth.

START

TIME

ON/OFF

+

HOUR

COOK

TIME

ON/OFF

Quick Reminder:

1. Press the COOK TIME ON/OFF pad.

2. Press the HOUR and MIN. pads to set the

desired length of cooking time.

3. Press the START TIME ON/OFF pad.

4. Press the HOUR and MIN. pads to set

the time of day you want cooking to start.

5. Turn the Oven Temperature knob to the 

desired temperature.

How to Set Delay Start and Automatic Stop

Questions and Answers

Q. Can I use the minute timer during oven

cooking?

A. The minute timer can be used during any 

cooking function.

Q. Can I change the time of day on the clock while

I’m Time Baking in the oven?

A. The time of day on the clock should not be

changed during any program that uses the oven
timer. You must either stop those programs or wait
until they are finished before changing the time.

Summary of Contents for JBP60













































Reviews: