GE JB600 Specifications Download Page 20

Page: 20 / 53

The Sabbath feature can be used for baking/roasting only. It cannot be used for broiling, self-cleaning or
Delay Start cooking.

NOTE:

The oven light comes on automatically (on some models) when the door is opened and goes off when the

door is closed. The bulb may be removed. See the Oven Light Replacement section. On models with a light switch
on the control panel, the oven light may be turned on and left on.

How to Set for Timed Baking/Roasting—Immediate Start and Automatic Stop

NOTE:

To understand how the oven control works,

practice using regular (non-Sabbath) Immediate Start and
Automatic Stop before entering the Sabbath mode.

Make sure the clock shows the correct time of day
and the oven is off.

Touch and hold

both

the

BAKE

and

BROIL HI/LO

pads,

at the same time

until the display shows

SF.

Tap the

CLOCK

pad until

SAb

appears

in the display.

Touch the

START/ON

pad and

⊃

will

appear in the display.

Touch the

COOKING TIME

pad.

Touch the

–

pads to set the desired

length of cooking time between 1 minute
and 9 hours and 59 minutes. The cooking
time that you entered will be displayed.

Touch the

START/ON

pad.

Touch the

BAKE

pad. No signal will

be given.

The preset starting temperature will
automatically be set to 350.° Tap the

–

pads to increase or decrease the

temperature in 25° increments. The
temperature can be set between 170°
and 550.° No signal or temperature
will be given.

Touch the

START/ON

pad.

After a random delay period of
approximately 30 seconds to 1 minute,

⊃

will appear in the display indicating

that the oven is baking/roasting. If

⊃

doesn’t appear in the display, start again
at Step 7.

To adjust the oven temperature, touch the

BAKE

pad and tap the

–

pads to increase

or decrease the temperature in 25° increments.
Touch the

START/ON

pad.

When cooking is finished, the display will change
from

⊃

, indicating that the oven has

turned

OFF

but is still set in Sabbath. Remove

the cooked food.

⊃

Using the Sabbath Feature.

(on some models)

(Designed for use on the Jewish Sabbath and Holidays)

ge.com

How to Set for Regular Baking/Roasting

NOTE:

To understand how the oven control works,

practice using regular baking (non-Sabbath) before
entering Sabbath mode.

Make sure the clock shows the correct time of day
and the oven is off.

Touch and hold

both

the

BAKE

and

BROIL HI/LO

pads,

at the same time

until the display shows

SF.

Tap the

CLOCK

pad until

SAb

appears

in the display.

Touch the

START/ON

pad and

⊃

will

appear in the display.

Touch the

BAKE

pad. No signal will

be given.

The preset starting temperature will
automatically be set to 350.° Tap the

–

pads to increase or decrease the

temperature in 25° increments. The
temperature can be set between 170°
and 550.° No signal or temperature
will be given.

Touch the

START/ON

pad.

After a random delay period of
approximately 30 seconds to 1 minute,

⊃

will appear in the display indicating

that the oven is baking/roasting. If

⊃

doesn’t appear in the display, start again
at Step 4.

To adjust the oven temperature, touch the

BAKE

pad and tap the

–

pads to increase

or decrease the temperature in 25° increments.
Touch the

START/ON

pad.

NOTE:

The

CLEAR/OFF

and

COOKING TIME

pads

are active during the Sabbath feature.

⊃

When the display shows

⊃

the

oven is set in Sabbath. When the
display shows

⊃

the oven is

baking/roasting.

⊃

When the display shows

⊃

the

oven is set in Sabbath. When the
display shows

⊃

the oven is

baking/roasting.

⊃

Operating

Instructions

Care and Cleaning

Installation

Instructions

oubleshooting T

ips

Safety Instructions

Consumer Support

Summary of Contents for JB600






















































Search results

Summary of Contents for JB600

Reviews:

Related manuals for JB600

Brands by name

Popular brands

GE JB600, Specifications

Search results

Summary of Contents for JB600

Reviews:

Related manuals for JB600

Brands by name

Popular brands