background image

 

 

© 2003 Kalatel, a GE Interlogix company 

All Rights Reserved. 

Any GE Interlogix, Kalatel division, software 
supplied with GE Interlogix, Kalatel division, 
products is proprietary and furnished under 
license and can be used or copied only in 
accordance with the terms of such license. 

 

This document contains proprietary 
information that is protected by copyright. No 
part of this document may be reproduced or 
transmitted in any form or by any means 
without the prior written permission of GE 
Interlogix, Kalatel division. 

 

The information contained in this document is 
subject to change without notice. GE 
Interlogix, Kalatel division, in keeping pace 
with technological advances, is a company of 
product innovation. Therefore, it is difficult to 
ensure that all information provided is entirely 
accurate and up-to-date. GE Interlogix, Kalatel 
division, accepts no responsibility for 
inaccuracies or omissions and specifically 
disclaims any liabilities, losses, or risks, 
personal or otherwise, incurred as a 
consequence, directly or indirectly, of the use 
or application of any of the contents of this 
document. 

For the latest product specifications, visit GE 
Interlogix, Kalatel division, online at 
www.kalatel.com or contact your Kalatel sales 
representative. 

For technical support before and after 
installation, call 800-469-1676. 

Technical support is available 24 hours a day, 7 days 
a week. 

Call: 

Tech Support

 

800-469-1676 (6 A.M. – 5 P.M. PST Monday through Friday) 

 

Tech Support

 

541-740-3589 (all other times) 

 

Main

 

800-343-3358 or 541-754-9133 

Fax: 

Tech Support

 

541-752-9096 (available 24 hours a day) 

 

Main

 

541-754-7162 

Web: 

www.kalatel.com 

0150-0265A / August 2003 

This equipment has been tested and 
found to comply with the limits for a 
Class A digital device, pursuant to part 
15 of the FCC Rules. These limits are 
designed to provide reasonable 
protection against harmful interference 
when the equipment is operated in a 
commercial environment. This 
equipment generates, uses, and can 
radiate radio frequency energy and, if 
not installed and used in accordance 
with the instruction manual, may cause 
harmful interference to radio 
communications. 

You are cautioned that any changes or 
modifications not expressly approved 
by the party responsible for compliance 
could void the user's authority to 
operate the equipment.

 

Summary of Contents for Interlogix 0150-0265A



















Reviews: