GE Innova IGS 6, Preinstallation Manual

Page: 140 / 194

Chapter 4. Environmental Requirements
4.1 Relative Humidity and Temperature
NOTICE
Avoid extremes in temperatures
Innova system room climate requirements – relative humidity and temperature. Individual products or
components are classed by their installation area for in use see
Table 4-1 In use - Humidity and
Temperature on page 129 ,
Individual products or components are classed separately for Storage, see 1.4 Product Storage and
Handling Requirements on page 25 .
NOTE
Due to the differential in temperature / humidity between the clinical room and the room
below, the floor creates condensation within the gantry / patient table resulting in part
failure or rusting inside the gantry / patient table.
For systems that are planned to be installed on higher level (second floor or above), the
temperature and humidity of the rooms that are directly below the gantry room should be
maintained same as the exam room requirement. Failure to do so will void the equipment
warranty. Avoid above grade installations where the temperature is high in the area below
the gantry / table cables exit if at all possible.
Table 4-1 In use - Humidity and Temperature
INSTALLA-
TION ROOM
OF PRODUCT
OR COMPO-
NENT
RELATIVE HUMIDITY (NON-
CONDENSING)
TEMPERATURE
IN-USE IN-USE (See Note (2a)) RECOMMENDED (See Note
(2b))
MIN MAX MIN MAX MIN MAX
Examination
room
30% 70% +15°C +59°F +32°C +90°F
Design for Patient/ Operator
Comfort
Technical
room (See
Note (1))
30% 75% +10°C +50°F +32°C +90°F +13°C +55°F +25°C +77°F
Technical
room with
Fluoro UPS
optional
30% 75% +20°C +68 °F +25°C +77°F +20°C +68 °F +25°C +77°F
Control room 30% 75% +15°C +59°F +35°C +95°F +20°C +68°F +25°C +77°F
Environmental Requirements
5750182-1EN 3
Innova
TM
IGS 6
129