3
Problem
Possible Causes
What To Do
Automatic icemaker
Freezer compartment
• After installing the kit, allow the refrigerator to completely
does not work
too warm.
cool down for 24 hours. Once the compartment is cool,
the icemaker will begin ice production.
Icemaker is not turned on.
• Move the icemaker
feeler arm to the
ON
(down)
position.
Icemaker is not plugged
• If using a power cord adapter, make sure that it is fully
in correctly.
connected. Also, check that the icemaker cord plug is fully
inserted into the socket. See Plug in the icemaker.
Water line kinked.
• Check that the plastic water
line running from the valve
to the water tube inlet is not
kinked. See Connect the
water line. A kink in the
water line will restrict flow
to the water line.
Water supply turned off or
• After installing the kit, make sure the house water supply
not connected.
to the refrigerator has been turned on.
Piled up cubes in the storage bin • Level cubes by hand.
cause the icemaker to shut off.
Water valve is not plugged in
• Check that the valve wire
correctly.
adapter is completely
plugged onto the male
connector plug and the
terminals on the water valve.
See Attach the water valve.
Before you call for service…
GEAppliances.com
Troubleshooting Tips
Save time and money! Review the following chart first
and you may not need to call for service.
Clip Restraints
onto Locking
Tabs
Locking
Tabs
Hook
Adhesive-backed
Fasteners for
Water Tube
Male Connector
Plug
Valve
Terminals
Feeler Arm
Model
Feeler Arm in the ON
(down) position
Feeler Arm in the
STOP (up) position