GE IC754VBB06CTD, Manual

Page: 4 / 38

.
4
Qui User’s Manual–November 2013
GFK-2847
GFK-2847
Qui User’s Manual–November 2013
7
Chapter 1 Introduction
Chapter 1. Introduction
The Qui operator interface is an all-in-one microcomputer designed for maximum
flexibility. The design, based on an advanced ARM core microprocessor, brings together a
high-resolution touch-screen operator interface with a variety of communications options. You
can connect to most industrial equipment through the Qui communications ports.
The Qui is equipped with several memory types to satisfy the most demanding
applications. A 512MB section of DRAM is split between the operating system, an object
store and application memory. Functioning as a virtual hard drive, a 256MB section of non-
volatile flash memory is divided between the operating system and persistent storage for
application programs. The retentive memory consists of 512KB of battery-backed SRAM for
data storage, protecting your valuable data during a power failure.
1.1 Specifications
1.1.1
General Specifications
Processor Freescale i.MX535 (1GHz ARM Cortex A8)
Memory RAM DDR2 SDRAM 512MB
ROM SLC NAND 256MB
SRAM 512 KB (with Battery backup)
Operating system Microsoft Windows Embedded Compact 7
Display Type
7” Widescreen TFT LCD
Resolution 800(W) x 480(H) pixels WVGA
Backlight LED
Touch screen Touch Panel Type Projected Capacitive
Multi-touch Two-point
Communications Ethernet Port 1x 10/100BaseT (RJ-45)
Serial Port 1x RS-232 UART Port (5-Pin Connector)
USB, Host Two USB2.0 (Type-A)
Max. Power (5V @ 0.5A)
USB, Device One USB 2.0 (Mini Type-B)
Storage One SD/SDHC Card Slot
Audio One Mic In (mono) (3.5mm Jack
One Line Out (Stereo) (3.5mm Jack)
Noise immunity Noise voltage: 1500V p-p
Pulse Duration: 1µs, Rise time: 1ns
Input power Maximum Rated
Voltage +30VDC
Rated Voltage +24VDC ±20% (3-Pin Connector)
Power Consumption 15W (max)
Frame Ground Frame GND is connected to Signal GND internally