HygroTrace Moisture Transmitter
13
September 2007
Setting Up the Transmitter
After proper installation, the
HygroTrace
Transmitter can be set
up to accommodate the user’s requirements. Typically, the user
may need to configure the analog outputs, trim the analog
outputs, and program the digital outputs. Refer to the Menu Map,
Figure 9 on page 23, and complete the following steps. Upon
startup, the
HygroTrace
proceeds through several displays until a
screen similar to the following appears:
The symbol in the lower right corner
indicates that the screen is locked.
To unlock the screen, press
Cancel
,
Enter
,
Cancel
.
Note:
In most instances; use the
Enter
key to save an entry and/
or move ahead to the following screen; use the
Cancel
key
to reject an entry and/or return to the previous screen.
Display
When the screen is unlocked, the
Main Menu
appears with several
options. To set up the display, select
Display...
and press
Enter
. The
following screen appears:
To show the primary ppb
v
display,
select
Measurement
and press
Enter
. A screen similar to the
following appears:
Press
Cancel
to return to the
Main
Menu
.
Diagnostics
- has limited access. The service passcode is
required. For a description, see
Diagnostics
on page 29.
8
9
8