GE HLD4000 Series Owner'S Manual Download Page 6

6

Customer Service

Tr

oubleshooting T

ips

Operating Instructions

Safety Instructions

Installation Instructions

Customer Service

Tr

oubleshooting T

ips

Installation Instructions

Safety Instructions

Operating Instructions

Customer Service

Tr

oubleshooting T

ips

Installation Instructions

Safety Instructions

Operating Instructions

About the dishwasher control panel. 

(For models without a sensor: EDW4000 Series, 

EDW5000 Series, GHDA400 Series, GLD4000 Series, GLD5000 Series, HLD4000 Series, GLDE400 Series and GLDE500 Series)

You can locate your model number on the tub wall just inside the door. Throughout this manual, features and
appearance may vary from your model.

Control Settings 

Status Indicator Lights

The Status display tells you what’s happening while the dishwasher is in operation and may flash, indicating a
malfunction. The lights will come 

ON

indicating the sequence of operation the dishwasher is in.

SANITIZED

Displayed when cycle has met sanitization conditions. Light remains 

ON

until 

(on some 

door is opened.

models)

CLEAN

Displayed when a wash cycle is complete. The light stays 

ON

as a reminder that

(on some 

the dishes are clean until the door is opened or until another cycle is selected.

models)

Cycles

The light above the selected pad will be 

ON

to indicate which cycle has been selected.

SANI WASH

7.3 gal., 97 min.

(on some

This cycle raises the water temperature in the final rinse to sanitize your dishware. 

models)

The cycle length will vary depending on the temperature of your inlet water.

NOTE: 

The 

SANI-WASH

cycle is monitored for sanitization requirements. If the cycle is

interrupted during or after the main wash portion or if the incoming water temperature is
so low that adequate water heating cannot be achieved, the sanitizing conditions may
not be met. In these cases, the sanitized light will not illuminate at the end of the cycle.

NOTE: 

NSF certified residential dishwashers are not intended for licensed food establishments.

POTS & PANS

8.5 gal., 89 min.

or

HEAVY

This cycle is meant for heavily soiled dishes or cookware with dried-on or baked-

WASH

on soils. Everyday dishes are safe to be used in this cycle.

NORMAL WASH

5.9 gal., 56 min.
This cycle is for medium/heavily soiled dishes and glassware.

ECO WASH

4.8 gal., 55 min.

(on some

This cycle is for everyday dishes and glassware.

models)

LIGHT WASH

6.1 gal., 36 min.

(on some 

This cycle is for everyday dishes and glassware.

models)

CHINA CRYSTAL

6.1 gal., 39 min.

(on some 

This cycle is for lightly soiled china and crystal. 

models)

RINSE ONLY

1.2 gal., 6 min.
For rinsing partial loads that will be washed later. Do not use detergent with this cycle.

NOTE: 

Only the 

SANI-WASH

cycle has been designed to meet the requirements of Section 6, NSF 184 for

soil removal and sanitization efficacy

.

1

1

3

4

2

2

Summary of Contents for HLD4000 Series



















Reviews: