GE M
EDICAL
S
YSTEMS
D
IRECTION
5184024-100, R
EVISION
5
LOGIQ
WORKS
B
ASIC
S
ERVICE
M
ANUAL
3-62
Section 3-4 - Completing the Installation
3-4-6
Initialize Service Platform for LOGIQworks up to Version 2.0
The Checkout process initiates a communication between the customer and GE. Before you begin with
the checkout you need to have an IP address to connect to the GE network.
You can choose between two physical connection types the “Modem connection” or the “VPN
connection”.
For a complete Checkout you have to prepare first the client (customer) PC. After the client PC is
prepared you or somebody in the OLC can finish the checkout using the VOLC software.
To prepare the client PC you should know the GE InSite IP address.
To finish the Checkout using VOLC you need to know the Service SystemID, which can be derived from
the Manufacturing System number (
See “Recovery CD Label with Rating Plate Label” on page 18.
) in
the following way: Service SystemID = Dell Service Tag.
1.) Go to iLingqShell on the desktop and click the button
.
2.) To start “InSite Interactive Platform Configuration” type in the following lines:
3.) Wait for the application to come up.
4.) Click 3 times “accept” at the start screen.
5.) Select the “Device connection” tab.
