GE H48671KK, Service Manual

Page: 85 / 432

GE H
EALTHCARE
DRAFT V
OLUSON
E8 / V
OLUSON
E6
D
IRECTION
KTD102576, R
EVISION
7 DRAFT (A
UGUST
23, 2012) S
ERVICE
M
ANUAL
Chapter 3 - Setup Instructions 3-19
6.) Press the
↓
(down) button on the front of the recorder repeatedly until [REMOTE I/F] is
highlighted, see Figure 3-14 on page 3-20 .
7.) Press the
→
(right) button to enter the REMOTE I/F menu.
8.) Press the
↓
(down) button until you see
USB
on the screen.
9.) Press the
SET
button
(C) -
on the front of the DVD recorder - to select USB.
Your DVD recorder is now using USB Remote Interface.
3-5-5-2-2 Changing TV System (Video Format)
NOTE: To check Video format needed, see: Table 3-6, “TV-System and Region Code,” on page 3-21 .
1.) If not already done, switch on the Sony DVO-1000MD DVD recorder.
2.) Press the
MENU
button
(A)
located on the front of the DVD, see: Figure 3-10 on page 3-18 .
3.) The “Main Menu” appears on the LCD screen of the DVD recorder, see: Figure 3-13 below.
4.) Press the
↓
(down) button on the front of the recorder repeatedly until the [SETUP MENU] item
is highlighted.
5.) Press the
→
(right) button. The “Setup Menu” appears, see Figure 3-14 on page 3-20 .
Figure 3-12 “Main Menu” - [REMOTE I/F] highlighted
Figure 3-13 “Main Menu” - [SETUP MENU] highlighted
change REMOTE I/F
to
USB
select [SETUP MENU]