6
Operating instructions.
Automatic Load Sensing
This provides the correct amount of water suited to the size and type of load placed in the unit. The washer will not fill with water
during automatic load sensing if the lid is open. When the lid is closed the machine is able to begin filling with water in order to
sense the load size.
NOTE:
This is a high efficiency washing machine with Infusor™ wash action. This system requires less water while providing effective
cleaning action. You may notice that the water level is lower than on your previous washer. This is normal for an Infusor™-equipped
washer.
Cycle Options
Delay Wash
When the
Delay Wash
button is repeatedly pressed, the delay time is set from 1 (01H) to 9 (09H) hours and back to clear (00H) hours. If you
press and hold the
Delay Wash
button for 3 seconds, it will immediately reset.
Fabric Softener
Set this option to provide a
deep rinse
or when manually adding fabric softener to the rinse cycle.
NOTE:
This option is not allowed for some
cycles. When allowed, it may change other settings (e.g.
Spin
may go to a higher setting) to maximize performance.
NOTE:
Do not use fabric softener dispensing balls with this washer. They do not work correctly in high efficiency washers.
eWash
When the
eWash
button is pressed, the cycle changes to its most energy efficient settings and all of the
eMonitor
lights will light to indicate
that the most efficient settings are on. If you change settings, the
eWash
light will go off and the number of
eMonitor
lights will decrease (or
increase) to indicate decreased (or increased) energy efficiency settings.
Additional Options
Soak
This option begins with a brief agitation, soaks for a specified period of time, then moves through the rest of the cycle automatically.
Repeated pressing of the
Soak
button will add 15, then 30 and then return back to 0 soak minutes.
Extra Rinse
When you use extra detergent or bleach to clean heavily soiled clothes, use the
Extra Rinse
option to better remove additional residues.
NOTE:
This option is not allowed for some cycles.
Control Lock
You can lock the controls to prevent any selections from being made. Or you can lock the controls after you have started a cycle. Children
cannot accidentally start the washer by touching buttons with this option selected.
7RORFNWKHZDVKHUFRQWUROV
press and hold both the
Soak
and
Extra Rinse
buttons for 3 seconds. The control lock icon will light up when it
is on.
7RXQORFNWKHZDVKHUFRQWUROV
press and hold both the
Soak
and
Extra Rinse
buttons for 3 seconds.
NOTE:
The
Power
button can still be used when the machine is locked.
Signal
Select for an end of cycle signal.
F
G
Average Small Load
Clothes Level
Water Level
Average Medium Load
Clothes Level
Water Level
Clothes Level
Water Level
Average Large Load
