6
5
METHODS OF SAFE INSTALLATION
1. SAFE INSTALLATION PLACE FOR YOUR REFRIGERATOR
•
Place the refrigerator on
a strong and level floor.
Unstable installation can
produce noise and
vibration.
NO
NO
•
Place your refrigerator
where there is no heat
source nearby.
High atmosphere
temperature will lower
cooling efficiency and
increase your electricity
bill.
•
Place the refrigerator in
an area where the
humidity level is low.
Splashing water on the
refrigerator or installing
the unit in a humid area
may cause short circuit
and rust.
•
Avoid places that are
exposed to coal gas or
smoke, or discoloring
may occur on the
refrigerator.
At least 6cm
At least 6cm
At least 30cm
Carpet
Wooden Board,
Rubber Mat
•
For good ventilation,
keep enough space
between the sidewalls
and your.
This helps to cool
efficiently and lowers the
electricity bill.
•
Putting the refrigerator
on the carpet may cause
temperature rise and
result in the discoloring
of the carpet due to the
compressor heat.
In such a case, place a
hard wooden board or a
rubber mat between the
carpet and the unit.
2. INSTALLATION STEPS
•
Select a safe place to
install your refrigerator.
Safe installation
place
Maintain ~
Level
Com
ponents to their
original places
•
Level the refrigerator by
using the adjustable feet.
•
Install the parts in their
own place.
•
Check if the doors are
completely closed.
Check
Check
Plug in after
about hour
Put food after
2~3 hours
•
Check the voltage.
Then wait about an hour
before plugging the
power cord into the
outlet.
•
Put food in the
refrigerator after running
the refrigerator for 2~3
hours.
