background image

Consumer Support

Tr

oubleshooting T

ips

Operating Instructions

Safety Instructions

Installation Instructions

11

About the automatic icemaker.

www.GEAppliances.com

A newly-installed refrigerator may take 12 to 24 hours to begin making ice.

Icemaker Accessory Kit

If your refrigerator did not already come
equipped with an automatic icemaker, 
an icemaker accessory kit is available at
extra cost. 

Check the back of the refrigerator for
the specific icemaker kit needed for your
model.

Automatic Icemaker 

(on some models)

The icemaker will produce seven cubes
per cycle–approximately 100-130 cubes 
in a 24-hour period, depending on
freezer compartment temperature, 
room temperature, number of door
openings and other use conditions.

There are two types of icemakers: power
switch models and feeler arm models.

If the refrigerator is operated before 
the water connection is made to the
icemaker, set the power switch to 

O (off) 

or move the feeler arm to the 

STOP 

(up)

position.

When the refrigerator has been
connected to the water supply, set the
power switch to the 

I (on) 

position or move

the feeler arm to the 

ON 

(down) position.

On power switch models, the green light
will come on.

You will hear a buzzing sound each time
the icemaker fills with water.

The icemaker will fill with water when 
it cools to 15°F. A newly-installed
refrigerator may take 12 to 24 hours 
to begin making ice cubes.

Throw away the first few batches of ice 
to allow the water line to clear.

Be sure nothing interferes with the
sweep of the feeler arm.

When the bin fills to the level of the
feeler arm, the icemaker will stop
producing ice.

It is normal for several cubes to be joined
together.

If ice is not used frequently, old ice cubes
will become cloudy, taste stale and shrink.

On power switch models, the green power
light will blink if ice cubes get stuck in the
icemaker. To correct this, set the power
switch to 

O (off) 

and remove the cubes. Set

the power switch to 

I (on) 

to restart the

icemaker. After the icemaker has been
turned on again, there will be a delay of
about 45 minutes before the icemaker
resumes operation.

NOTE: 

In homes with lower-than-average water

pressure, you may hear the icemaker cycle
multiple times when making one batch of ice.

Icemaker

Feeler Arm

Power
Switch

Green
Power Light

Power switch model

Feeler Arm in
the 

STOP

(up) position

Feeler Arm in
the 

ON

(down)

position

Feeler arm model

Summary of Contents for GTS17BBMR

































Reviews: