8
7
4. CLEANING YOUR REFRIGERATOR
Before you clean the
r e f r i g e r a t o r, unplug the
power cord. To clean,
use a soft piece of
cloth. Wash with warm,
soapy water rinse and
d r y.
The refrigerator may
smell during the initial
operation, but the
odour will fade away
when the refrigerator is
cooled suff i c i e n t l y.
Use a soft cloth for
cleaning the interior
and exterior of the
r e f r i g e r a t o r.
Do not sprinkle water
directly on the
refrigerator itself.
Put the parts back in
their original positions
after cleaning.
Location
How to Install
Install the refrigerator in a convenient location away from extreme heat and
cold. Allow at least 6cm clearance between the refrigerator and side wall so
that the door may open for a fully usable interior and the refrigerator may have
good air circulation. The refrigerator is not designed for recessed installation.
Select a strong and level floor.
Keep 6cm of space between the
refrigerator
and the walls.
Leveling
Level the refrigerator so that it rests solidly on the floor without rocking. There
are two leveling feet at each front corner. Turn to the left to raise a corner, to
the right to lower it. Use shims under the rear corners, if necessary.
If you want the refrigerator door to close naturally, adjust the leveling feet
so that the front of the refrigerator is raised by 5mm.
If you want the refrigerator to remain motionless when open, adjust the
leveling feet so that all four corners are leveled with each other.
N O T E : All packing materials used to ensure safety during transport
should be removed. You must remove the transport safty packing
and wipe off any possible adhesive tape residues with a
petroleum-based cleaner or similar solvent.
