GE GSS1800H Series, Installation Instructions Manual, Page: 13 / 16

13
Operate the Dishwasher
Before you start your dishwasher, check the following:
• Dishwasher is level and securely fastened in place.
• Open and close door to make sure it does not hit surrounding cabinet or countertop.
• Water supply is turned on.
• No leaking from joints.
• All wire connections are tight.
• Electricity is turned on.
• No kinks in water or drain lines.
• All packing material and customer literature have been taken out of the dishwasher.
Operate the machine through at least one fill and pump-out.
• Check water level after dishwasher has filled completely. Water should fill to the heating element.
• Check for satisfactory pump-out. At end of pump-out, a small amount of water in the bottom of the tub is
normal.
• Check for leaks.
If operation is satisfactory, replace the access panel assembly.
NOTE to INSTALLER: Put installation instructions back in the literature packet and leave with
dishwasher so all information will be readily available to user.
NOTE to OWNER: Please read the dishwasher Owner’s Manual. It contains important safety
information for those operating the appliance. It also contains many suggestions for obtaining
the best results from your dishwasher.