GE GSD950 Use And Care Manual Download Page 14

PROBLEM

SPOTS AND

FILMING ON
GLASSES AND

FLATWARE

CLOUDINESS ON

CHIPPING OF CHINA

14

THE PROBLEM SOLVER

(continued)

POSSIBLE CAUSE

Spotting can be caused by all these things:

● 

Extremely hard water. (See How to Choose and Use Detergent section),

 Low inlet water temperature. (See How to Test Water Temperature section).

● 

Overloading the dishwasher.

● 

Improper loading. (See Loading section).

● 

Old or damp powder detergent,

● 

Phosphate level in detergent too low. (See How to Choose and Use

Detergent section).

● 

Rinse agent dispenser empty. (See How to Use a Rinse Agent section).

● 

Too little detergent. (See How to Choose and Use Detergent section),

Local water conditions and personal preferences vary. Try several brands of
detergents to find one that gives the best results for you. A liquid dishwasher
detergent may help reduce filming.

To remove stubborn spots and 

 from glassware:

1. Remove all metal utensils from the dishwasher.

2. Do not add detergent.

3. Select POTSCRUBBER 

4. Start the dishwasher and allow to run for 18 to 22 minutes. The dishwasher will

now be in the main wash.

5. Then open the door and pour 2 cups (500 ml) of white vinegar into the bottom of

the dishwasher.

6. 

Close the door and allow to complete the cycle.

If vinegar rinse doesn’t work: Repeat as above, except use 1/4 cup 

(60 

ml) of citric

acid crystals instead of vinegar. (Most drugstores carry citric acid crystals. If yours

doesn’t, call GE Factory Service).

Using a vinegar or citric acid crystal rinse more than twice a month? Consider a home
water softener.

If vinegar or citric acid crystal rinse doesn’t work, the cloudiness is “etching.”
The film cannot be removed.

It can be prevented: Use less detergent if you have soft water. Wash glassware in
the shortest cycle that will get them clean.

Water temperature entering dishwasher exceeds 

Rough handling 

 cause chipping. Load with care. Make sure glassware and china

are secure and can’t jar loose. (See Loading section). Make sure 

 glasses and

stemware will clear the top of the tub when you push the rack into the dishwasher.

Always use the top rack for delicate items.

 

Summary of Contents for GSD950





















Reviews: