
HOW TO CHANGE COLOR PANELS
If you are redecorating, you can change your dishwasher’s front panels to
match or blend with your new
by flipping them over. Each side of
each panel is a different color. You may also paint a
with a color of
your own choice.
How to Change the Door Panel:
1. Take out trim screws on either side of the
dishwasher door. Remove the side trim.
2. Slide the door panel out.
(Careful—edges may be sharp.)
3. Turn the door panel around and put the color you
want in front.
4. Replace the door panel, side trim and screws.
NOTE: Do not operate
dishwasher while changing
panels or when lower access
panel is removed.
How to Change the Lower Panel:
Attachment Screws
1. Remove the panel attachment screws.
2. Remove the entire access assembly by lifting it up
and over the retaining tabs.
3. Take out the top trim screws and remove the
top trim.
4. Slide the color panel(s) up and out and put the
color you want in front.
5. Replace the top trim and screws.
6. Replace the entire access assembly by hanging it
back on the retaining tabs. Hold the access assembly
in place and replace the attachment screws.
Wood
Kits
(Available for both models)
Wood panel trim kits, contain trim and
instructions for adding a decorative wood door
panel and lower access panel no thicker than 1/4”
to match kitchen cabinets.
Specify the trim color of your choice from the
following options:
(Chrome Trim and Screws)
(Black Trim)
(White Trim)
The kit is available for $5.00 (shipping and handling).
Make check payable to the General Electric Co.
(For model
only)
If you have redecorated, and the color panels in
your dishwasher do not blend with your new color
scheme you may order one additional color panel
without charge.
Specify the
panel you would like from the
following options:
White/Almond
Order a Trim Kit or a Color Panel from:
GE Appliances
c/o
Manufacturing
4706
Ave.
Louisville, KY 40209