![GE GSD800 Owner'S Manual Download Page 21](http://html.mh-extra.com/html/ge/gsd800/gsd800_owners-manual_2199455021.webp)
21
Customer Ser
vice
Tr
oubleshooting T
ips
Operating Instr
uctions
Safety Infor
mation
Problem
Possible Causes
What To Do
Stained tub interior
Detergent with
•
Some detergents contain
colorant was used
colorant (pigment or dyes)
that will discolor the tub
interior with extended use.
Check the detergent cup
for signs of any
discoloration. If cup is
discolored, change to
detergent without any
colorant.
Dishes don’t dry
Low inlet water
•
Make sure inlet water
temperature
temperature is correct.
Rinse agent dispenser
•
Check the rinse agent
is empty
dispenser.
Dry cycle not complete
•
Make sure
CYCLE ON
light
is off, indicating the dry
cycle (if selected) is
complete.
Dishes and flatware
Inlet water temperature
•
Raise the water heater
not clean
is below 120°F.
temperature to 120°F.
•
Try the
TEMP BOOST
option.
Water pressure is
•
Turn on a faucet. Is water
temporarily low
coming out more slowly
than usual? If so, wait until
pressure is normal before
using your dishwasher.
Air gap is clogged
•
Clean the air gap.
Improper rack loading
•
Make sure large dishware
does not block the
detergent dispenser or the
wash arm.
Cycle and option indicator
This is normal
•
Unlatch the door to turn
lights stay on when cycle
off the Cycle and Energy
is completed
Option indicator lights.
NOTE:
The
Cycle On
light
will stay on until all cycles
are complete. Wait until
this light goes off to unlatch
the door or a cycle will be
interrupted.
Summary of Contents for GSD800
Page 24: ...Safety Information Operating Instructions Troubleshooting Tips Customer Service 24 Notes ...
Page 25: ...25 Customer Service Troubleshooting Tips Operating Instructions Safety Information ...
Page 26: ...Safety Information Operating Instructions Troubleshooting Tips Customer Service 26 Notes ...